[Chimera-users] Contact Maps (RRdistance Maps) questions:

Nicole Persky persky at broadinstitute.org
Thu Mar 23 14:31:52 PDT 2017


Oh Wow! Thanks so much Elaine! That command line was super helpful.
I should definitely be able to work with this. Thank you so much!
One quick followup question, you mentioned in (C) that there is an export
button for giving value matrices for all pairs, where is that located? I
wasn't able to locate it.
Again, thank you so much for your help! It totally helped me get started.
Sincerely,
Nicky

On Wed, Mar 22, 2017 at 10:05 PM, Elaine Meng <meng at cgl.ucsf.edu> wrote:

> Hi Nicky,
> Unfortunately the RR Dist Maps tool is limited in just the ways you
> describe, so not that useful for what you want to do.  A better way is with
> “findclash”  but that would entail some postprocessing, see the last part
> of this message.
>
> (A) Coloring applies across the whole value range, not just the unmasked
> part… e.g. even if you have masked everything above 6 A with some solid
> color (let’s say dark blue) and specified showing short-long distances with
> a white-black gradient, white is 0 angstroms and black is longest
> residue-residue distance in the protein, typically >50 A.  So the unmasked
> part of 0-6 A is only white to very light gray and you can’t really see any
> color differences…not that helpful if you are only interested in smaller
> differences between these shorter-range contacts.  (I realize you
> understand this problem, I’m just laying it out in case anybody else is
> following along.)  This problem is mentioned in the technical notes at the
> bottom of the help page for this tool:
> <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/
> rrdistmaps/rrdistmaps.html>
>
> (B) Cannot show two RR Dist Maps dialogs at the same time.  So to see two
> maps side by side, you’d have to either run two Chimera sessions
> concurrently or within a single session, do one calculation, save image, do
> another, save image again or compare current dialog with previously saved
> image.
>
> One way to compare the below-6-angstrom contacts only is to show
> side-by-side images of the distance map calculated for each protein
> separately with the distances >6 A masked out.  However, this will only
> show differences of where there is a contact <6A in one protein and not the
> other, but because of the coloring issue, subtleties in different distances
> within that range will not be perceptible.
>
> Another way is to compare the individual distance maps (or a single map of
> average distance) with a difference map.  However, it would be difficult to
> tell exactly where the unmasked parts of the distance maps would be on the
> difference map and only look at those latter areas of the difference map.
>
> (C) the Export button gives all the values of RR distance, and (if a
> comparison) standard deviation in RR distance and difference in RR
> distance.  There isn’t an option to give only the residue IDs for contact
> pairs within some distance; it only gives value matrices for all pairs.
>
> (D) RR DIst Maps visualization is also focused on those 3 quantities, not
> attribute values.  Chimera attributes are assigned to individual atoms,
> residues, or models, not a pair of residues. The RR distance map shows
> residue-pair values with color.
>
> If you want to use Chimera, for your purposes I think the best approach
> would be to use "Find Clashes/Contacts” or the “findclash” command to
> measure (intraprotein) CA-CA distances, and then filter to list only the
> pairs within 6 A.  Then you could do that for the other protein as well,
> then compare the two lists.  For example, if you had one of your proteins
> already open as #0, command:
>
> findclash #0 at ca test self overlap -2.3 save ~/Desktop/protein1.txt
>
> <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/findclash.html>
>
> … would save a text file listing all CA-CA pairs with VDW surfaces within
> 2.3 angstroms.  The distance from atom center to atom center will be
> larger, but the output file will also give that distance and you can delete
> the pairs for which it is >6 angstroms.  I chose -2.3 because that should
> give you all the pairs within 6 angstroms and only a few with larger
> distances, using the VDW radii of CA atoms in structures without hydrogen
> atoms.  You may need to use a larger distance to get them all if your
> protein has hydrogens, but in any case, you will be able to tell by looking
> at the center-center distances included in the output.  The list is sorted
> by decreasing overlap so that longer distances willl be near the end.  This
> example command will automatically exclude residues that are adjacent in
> sequence (separated by no more than 4 bonds), but you could add the
> findclash command option “bondsep 2” to include those as well.
>
> You can use “log true” instead of (or in addition to) the “save” option to
> show the output in the Reply Log.  For example, if I have PDB 2gbp open as
> model #0, command:
>
> findclash #0 at ca test self overlap -2.3 log true
>
> … sends the following stuff to the Reply Log, primarily a list of the two
> atoms’ identifiers, atom-atom VDW overlap (negative value = separation
> between VDW surfaces of the two atoms), and atom-atom center-to-center
> distance:
> -------------------
> Allowed overlap: -2.3
> H-bond overlap reduction: 0.4
> Ignore contacts between atoms separated by 4 bonds or less
> Detect intra-residue contacts: False
> Detect intra-molecule contacts: True
>
> 620 contacts
> atom1  atom2  overlap  distance
> ARG 158.A CA  GLY 116.A CA  -0.203  3.963
> LYS 189.A CA  GLY 217.A CA  -0.321  4.081
> ARG 292.A CA  THR 110.A CA  -0.372  4.132
> GLY 297.A CA  VAL 254.A CA  -0.453  4.213
> THR 180.A CA  LYS 147.A CA  -0.460  4.220
> VAL 235.A CA  ASN 211.A CA  -0.480  4.240
> GLY 120.A CA  VAL 162.A CA  -0.493  4.253
> LEU 196.A CA  ALA 201.A CA  -0.572  4.332
> GLY 116.A CA  VAL 162.A CA  -0.663  4.423
> MET 182.A CA  GLY 148.A CA  -0.668  4.428
> THR 185.A CA  GLY 217.A CA  -0.697  4.457
> ASN 256.A CA  ASP 236.A CA  -0.732  4.492
> MET 182.A CA  GLU 149.A CA  -0.748  4.508
> GLY 234.A CA  ASP 212.A CA  -0.794  4.554
> […. many lines …]
> PHE 266.A CA  LYS 270.A CA  -2.269  6.029
> ALA 155.A CA  THR 159.A CA  -2.274  6.034
> ASN 302.A CA  GLU 305.A CA  -2.277  6.037
> ILE 9.A CA    SER 41.A CA   -2.283  6.043
> VAL 206.A CA  ILE 204.A CA  -2.285  6.045
> LYS 92.A CA   LEU 67.A CA   -2.286  6.046
> ALA 264.A CA  LEU 268.A CA  -2.286  6.046
> LYS 270.A CA  ASP 274.A CA  -2.288  6.048
> PRO 86.A CA   ALA 105.A CA  -2.289  6.049
> ASN 130.A CA  HIS 126.A CA  -2.292  6.052
> PHE 89.A CA   TYR 106.A CA  -2.293  6.053
> ALA 251.A CA  VAL 245.A CA  -2.298  6.058
> 620 contacts
> ---------------
> So, you would need to do some minor postprocessing to remove pairs with
> distances >6 angstroms and probably the harder part would be figuring out
> how to compare the two lists. Sorry I couldn’t give a more convenient
> solution.
> Elaine
> -----
> Elaine C. Meng, Ph.D.
> UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab
> Department of Pharmaceutical Chemistry
> University of California, San Francisco
>
> > On Mar 22, 2017, at 12:44 PM, Nicole Persky <persky at broadinstitute.org>
> wrote:
> >
> > Hi All,
> > I've just found the RRdistance Map function on Chimera and
> > would like to compare between structures.
> > I would like to:
> > 1- make contact map of protein 1 to protein 1 with a cutoff of about 6
> angstroms
> > 2- make a contact map of protein 2 to protein 2 with a cutoff of about 6
> angstroms
> > 3- compare these two contact maps using the colors available for the
> whole contact map.
> >
> > I can only seem to compare the ENTIRE contact map of protein 1 to the
> ENTIRE map of protein 2, whereas I'd like to mask any contacts over 6
> angstroms.
> >
> > Alternatively, if anyone knows of a way to export residue lists of
> contacts from the contact map site I could just compare them that way.
> >
> > ALSO:
> > Anyone know of a way to map defined attributes onto a contact map?
> >
> > Thanks so much!
> > Sincerely,
> > Nicky
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://plato.cgl.ucsf.edu/pipermail/chimera-users/attachments/20170323/10b6b2d4/attachment-0001.html>


More information about the Chimera-users mailing list