Subject: peak picking
From: jpwml
Date: Jun 6, 2006

Next: 158


Dear Mandar,
as usual a very good tip with the 2D projections,
but anyhow this is not the problem.
I found that I have some very high intensity noise peaks and this
seems to disturb kr very much.
But if I reduce the contour level or intensity my peaks are also invisble.
The best method I found is using the world statement and then pick the
peaks by adjusting the linewidth accordingly in the kt statement.
Off course if I could cut the region with the noisy peaks out, I guess
kr would also work.
But anyhow in this way I can get a good peak list.

Ciao

Lassalle